Wisdom Pouchannel puts a heavy gate on little rollers
A brief installation demo draws nearly ten times the channel's usual early viewing for a Short.
Why this story? The video opened at a pace of 626,700 views a day, 9.6 times a normal first day on this channel (65,303).
Mount Heavy Duty Bottom Rollers To Make Large Gate Slide Easily
The hammering stops, a steel rail slips over the wheels, and the mechanism gets its test: a smooth sideways slide. Wisdom Pouchannel's latest gate-installation Short has reached nearly 600,000 views in 21 hours, an unusually fast start for the channel.
There is no spoken explanation. A worker seats a multi-wheel roller assembly in pre-drilled concrete, taps the anchor bolts into place and checks the fitting before guiding the gate's bottom rail over it. The whole demonstration takes seconds.
The useful detail is underneath: instead of asking a single wheel to carry the load, the assembly spreads the gate's weight across several rollers. The channel's description explains that the C-channel rail attaches to the bottom of the gate, allowing it to travel horizontally over the fixed support.
One viewer focuses on the hammer rather than the sliding mechanism, recommending that the nuts protect the anchor threads while the bolts are tapped in. The description adds its own practical caveat: weak or cracked concrete can let the anchors loosen, while dirt and sand can wear the bearings.
Published on Trari
Where next?
What viewers say
When hammering in concrete anchors, back the nuts up so they protect the bolt. Don't hammer on the threads!
@artor9175See it on YouTube
Public comments from the video's page on YouTube
- Channel
- Wisdom Pouchannel
- Subscribers
- 10,000,000
- Channel views, last 7 days
- 10,798,745
- Channel views, pace per day
- 2,365,105 (on a normal day: 1,203,050)
- Video published
- November 4, 2026
- Video views so far
- 597,407 (less than a day online)
- Video views, pace per day
- 626,700
The numbers
The gate demonstration is running well ahead of Wisdom Pouchannel's usual early pace for Shorts.
💡 Test your knowledge
What surface is the roller assembly anchored into in this demonstration?
The worker secures the roller assembly's baseplate in pre-drilled holes in concrete.

