This week on the channel +36K views this week

richpin06a's Fusion mirror job hides its hardest part inside

The repair tutorial works past the speaker and control box to reach a stubborn electrical connector.

Channel:

richpin06a Story of November 12, 2026Trari Newsroom

Why this story? The channel's weekly summary: what went up this week, what is drawing views now, and where the channel stands among similar channels.

2013-20 Ford Fusion Outside Mirror Replacement

Things we can learn from the video

Press to jump

0:20Remove the window-switch panel and disconnect its electrical plug before taking off the door trim.
3:38The control box and lower speaker come out to expose the mirror's hidden wiring connection.
4:15A screwdriver through an access hole releases the connector's locking tab.
5:28Tape inside the socket helps keep the mirror's mounting nuts from falling into the door.
7:12Feed the replacement mirror's harness through the mounting hole, seat the studs and secure the nuts.
10:25Feed the window-switch wire through before completing the door-panel reassembly.

Replacing the mirror is only part of the job. In richpin06a's Ford Fusion tutorial, reaching its electrical connector means removing the door trim, control box and lower speaker first.

There were no new uploads this week, but the archive added roughly 36,000 views. The subscriber total stayed unchanged, while daily viewing is currently running above its usual level. Among nearby motoring channels, Wheelie Yellow had a particularly busy week; DoctaM3 was quieter.

The Fusion guide has the most daily momentum of the three mirror-replacement videos drawing attention, alongside the Escape and Jetta tutorials. Its useful detail is the awkwardness: the presenter reaches through an access hole to release a locking tab, then uses tape inside his socket to help avoid dropping the mounting nuts into the door.

"Here's the hardest part, getting the electrical connector out," he says once the old assembly is free. Installing the replacement brings another small lesson: bend the connector into alignment before pushing it home.

That patient, access-first approach sits comfortably beside richpin06a's long-running repair library, whose most-watched regular upload is "How To Use A Multimeter." Here, even reassembly gets a timely on-screen reminder: feed the window-switch wire through before finishing the door panel.

Published on Trari